Accessoires
AnimationBEAM
Accessoires
Projections for MR rooms
The IMEDCO projector brings movement into your MR room. For this purpose, an ultra-short throw projector is used, which can be discreetly integrated in the IMEDCO ceiling system. You can choose from two versions of the AnimationBEAM, the WXGA or the FULL HD version.
The new laser technology allows you to project animations, photos or videos in the best possible quality onto the walls of your MR room. It provides a completely new perspective for you and your patients.
The projector is housed in a special shielded box and was designed especially for use in the MR room. Signals can be transmitted to the projector without interference via a fiber optic connection HDMI or a USB stick.
Features and benefits
- Pleasant & individual atmosphere
- Patient comfort
- High-end product (laser technology)
- Ultra-short-throw projector
- Dust protected
- Integrated within the IMEDCO ceiling
- MRI compatible
- Integrated loudspeakers (10W)
- Remote controller
- Long service life of approx. 20 000 hours
PDF file
Technical data
- Projection surface
- 1600 x 950 mm @ 10 cm wall clearance
- 2000 x 1200 mm @ 20 cm wall clearance
- Up to 3000 mm diagonally with Full HD-Projector
- Resolution: WXGA 1280 × 800
- As an option: Full HD 1920 × 1080
- 4000 ANSI lumen
- Contrast ratio: 100 000:1
- RoHS & CE approved
- I/O connectors: HDMI (fiber optic), USB
AnimationSCREEN
Accessoires
MRI-compatible monitor
The 32” full HD AnimationSCREEN has been specially developed for the use in an MRI room. The image area is aesthetically integrated within our interior finishing. The monitor is generally placed at the rear wall behind the MR device. This allows the patient to see the image through the MR manufacturer supplied mirror-unit during the MRI scan. Consequently, the patient comfort rise to more pleasant and stress-free experience, especially for claustrophobic patients and children.
The interface outside the MRI room enables connection to the various media sources. The signals are transmitted via fiber optics to the monitor without interference.
Features and benefits
- Pleasant & individual atmosphere
- Suitable for MRI applications
- Higher LED full HD technology
- Patient comfort
- Integrated within the IMEDCO interior finishing
- Long service life of approx. 20 000 hours
- Other installation options on request
- Easy to operate
PDF file
Technical data
- Screen 32” approx. 80 cm full HD (1080p)
- Fiber optic transmission for data transfer
- Tested for 3.0T MRI systems
FerrALERT™ HALO II Plus
Accessoires
Safety first & identifying risks
Did you know that ferromagnetic items can turn into projectiles in an MR room? Both ferromagnetic detectors and competent staff make up the most important safety measures for your MRI operations. You are not only protecting patients and your staff but also your valuable investment. Serious accidents and following costly MRI downtimes belong to the past.
- How does it work?
The high-quality metal detector is integrated into our door frame to save space. You won’t notice it until you attempt to enter the MRI room with a ferro magnetic object. Although the optical proximity alert will already have warned you much earlier about the potential danger. Should the person continue walking and enter the portal, an acoustic as well as a visual alarm will be triggered. Integrated lights will also indicate the position of the ferromagnetic object. Bothersome false alarms are prevented by a light barrier and will not trouble your staff. As a result, any alarm will always be taken seriously.
When the RF door is closed and the examination is in progress, the FerrALERT™ is inactivated to avoid any interference. Opening the RF door reactivates the safety function.
The HALO II Plus version can additionally detect when somebody enters or exits the MRI room. Thus, the sensor is only activated when someone enters the MRI room. When the person exits the room after the examination, the acoustic signal is not triggered again.
Features and benefits
- Integrated within the IMEDCO interior finishing
- Visual proximity warning
- Detection and localisation of the object
- No false alarm due to light barrier
- Adjustable volume and sensitivity
- Optionally also suitable for inward-opening doors
- Clear width up to 1200 mm
- Commissioning and staff training by IMEDCO
PDF file
Technical data
- Installation together with an IMEDCO RF shielding
- Assembly outside the 5 Gauss line
- 220 V power supply provided on site
- Lead time 8 weeks
FerrALERT™ SOLO
Accessoires
Ferromagnetic detector for MR rooms
- How does it work?
The high-quality metal detector FerrAlert™ SOLO can be mounted free-standing or on a wall. As a free-standing version, the rollers integrated in the foot and the optionally available battery pack provide you with a high degree of flexibility. Regardless of where you place the detector, the motion sensor will activate the 6 detection zones of the sensor strip when approached. It will even indicate the position of the supposedly ferromagnetic object. In addition, an acoustic signal sounds.
The sensitivity of the detector as well as the volume of the acoustic signal can be individually adjusted. We recommend using the detector in the preparation room to identify potential dangers at an early stage.
Features and benefits
- Visual and acoustic warning
- Detection and localisation of the hazard
- Very sensitive detection (hairpin size)
- Adjustable volume and sensitivity
- H = 220 cm × B = 5,8 cm × T = 8,9 cm
- Commissioning and staff training by IMEDCO
PDF file
