IMEDCO AG
IMEDCO® AG
Industriestrasse West 14
4614 Haegendorf CH
+41 62 209 40 20

Interior finishing and fittings

To achieve an undisturbed homogeneous MRI field, all parts of the construction and internal fittings are of non-magnetic materials. The prefabricated wall panels are fitted quickly without creating appreciable noise and can be removed to give access to the RF enclosure for modifications, magnet replacement, etc. There is a choice of colour schemes and the surfaces are easy to clean and hygienic.

The ceiling panels are 400 mm wide aluminum finished with white oven baked enamel. They are perforated over 12 % of there area to provide both an acoustic barrier and an air distribution plenum if necessary. The sub construction is of non-ferrous material.

The wall panels are of fibreboard 16 mm thick and 1050 mm wide with a melamine finish (other finishes optionally available). They are held in place by vertical anodised aluminum rails with a decorative light grey plastic trim and extend from the finished floor up to the suspended ceiling. They can be removed for access if necessary.

IMEDCO shielded floors are covered in vinyl laid on copper strips connected to a common ground terminal using electrically conducting adhesive. Our standard floor colour is Forbo Colorex Adula.